Solvers & Features   Charge Transport

Device failure to converge (2)
Electrical Properties and Recombination Properties of ZnO and ZnTe? (2)
Issue with converging under illumination? (2)
Simulation issues in "Vertical Photodetector" tutorial (2)
Is this a correct formula? (4)
Generating the graph for Charge Distribution versus Position (2)
Transient Simulation - Relaxation Time (2)
Incorrect Steady State (Id vs Vg and Vd) and Small Signal simulation results (Plots) in Short Channel MOSFET (Channel Length =50 nm) (5)
How to add HgCdTe into lumerical DEVICE (2)
Device simulation of solar cell with conductive oxide (13)
How use simulate the time-response of Avalanche PD using lumerical Device (3)
Transient simulation in Lumerical Device for oscillator (2)
ZnO Semiconductor Material Data for DEVICE (5)
DEVICE 3D pillar silicon solar cell (2)
What are the n_ac and p_ac in small signal analysis? (3)
Multiple GDS Imports Crashes DEVICE (7)
Why 3dB of pd in transient simulation is so low? (7)
The 3dB bandwidth of utc pd? (3)
DEVICE Photodiode modeling - Excess Noise (6)
The 3dB bandwidth of utc pd (3)
Ring Resonator Issue (2)
Importing polygon mask to the Implant Doping Object (1)
How to modify the charge density as 2-dimension(x&z cross section) data? (4)
How to draw a (truncated) cone in DEVICE using the 'planar solid' object (12)
Effective Index Does Not Change In DEVICE Due To Doing Concentration (2)
Device current for ideal case of no recombination does not match the current from integrated G (9)
[DEVICE-charge] Refinement limit exceeded for auto-refinement. The mesh is valid but may not be adequately refined (6)
Doping objects (7)
How to run multiple voltage sweeps in DEVICE when you want to vary the voltages on multiple contacts? (3)
Unknown error code is 9010 ( DEVICE) (4)